You will need to determine the beam width of your 16 foot Lund Rebel SS Boat, for the proper fit of a cover.
A boat cover I would recommend that is good for outdoor storage is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. The StormPro covers will repel water, but are not waterproof. You will want to measure your beam width to determine if this cover will work. If your beam width... view full answer...
You can measure the exact beam width of your 16 foot Lund DLX Boat to determine the proper fit of a cover. For example, the Lund 1648T jon boat is 15-feet 10-inches long and has a beam width of 70-inches.
The boat cover I recommend is the Classic Accessories Boat Cover by StormPro, part # 052963889284. This cover fits 14 foot to 16 foot long boats that have a beam width of up to 90 inches. If your beam width is more than 90 inches, you will need part # 052963889383. view full answer...
After checking with the manufacturer the Classic Accessories Deluxe Poly Pro III # CA80039 is intended for use while the trailer is in storage. The manufacturer further explained that this is not recommended for use while towing. The manufacturers that we carry do not offer products for pop up campers that can be used while the camper is being towed.
If you would like to use a cover while towing you might want to check with a boat cover manufacturer and see if there are any options that... view full answer...
I am sorry for the confusion. We do offer a neoprene cover from Taylormade # 3695042 that will be a good fit for the # AM24NR fender that you mentioned. It is not the same brand as the Rotomolded Boat Fenders, but the fenders are 23" long x 6-1/2" diameter, and the cover is made to fit a 23" x 6-1/2" diameter fender. view full answer...
We can help you select Bearing Buddy grease caps for your hubs that have an inner bore of 2.11-inches. The size nearest to yours is 2.080-inches. All Bearing Buddy grease caps in this size are shown on the linked page. Note that these are offered in both threaded and non-threaded versions so be sure to choose the type to match your hub bore. view full answer...
While TecNiq does not offer the Mini Rectangular LED Boat Accent Light # TN47FR with a smoke lens they do have the Covers # TN44FR & # TN94FR in black. These hide a majority of the lens and only allow the end with the LED's to be seen. If you prefer to have this portion be smoked out you can cover them similarly to how some smoke the tail lights on their vehicle using black paint mixed with clear to get a smoked appearance. Do ensure if you do this the lights still meet local laws for visibility... view full answer...
Yes, we do!
The matching light for the Red LED Boat Navigation Light # TN92ZR is the Green part # TN32ZR. If you needed one with both light colors then that can be found as part # TN52ZR on our site as well.
Attached are some review videos for you to check out! view full answer...
A trailer tire in size 4.80/4.00-8 when fully inflated has an overall diameter of about 16-inches.
So for a spare tire cover for this tire size I suggest the smallest size we offer. If you click on the linked page you will see the three choices in a spare tire cover that will fit tires up to 21-inches in overall diameter. You have a choice of black, white or grey vinyl covers.
Part # CE27410 is black, part # 052963751000 is snow white.
These covers will provide a comfortable fit on your tire. view full answer...
I think the smallest we will have is still going to be too large for little egg type camper. Awesome camper by the way, see very few of these anymore. The Adco Polypropylene Storage Lot RV Cover for Travel Trailer, # 290-74838 is for trailers from 12-15 feet. My suggestion, if this is something you plan to keep for an extended length of time, locate a local custom boat cover maker. Have them sew up a custom fir for you. This will be more expensive but well worth the cost if you will... view full answer...
We don't offer a hub kit that meets all the parameters you mentioned, we have a couple of options that would work. Your boat trailer used an oddball hub/spindle combination, which was used by Ranger and a couple of other boat manufacturers with the idea being that you could only get the replacement parts from them. We do have an option, but you'd need to purchase the correct EZ Lube grease cover separately.
The CE Smith Hub Assembly, part #CE13311 is compatible with 8 to 12 inch wheels.... view full answer...
I have an alternate option for you, but we do not have any carpeted bunk boards that are 6" wide. All of our bunk boards are 2x4's.
Instead you can source the boards from a lumber yard or home improvement store and then use the CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards # CE11349 to cover the boards. A 2x6 is going to measure 14" all the way around, so this is the only carpeting that we have that is wide enough.
To cover your (2) 6' boards and (2) 10' boards you will need... view full answer...
We do offer disc brake kits, both complete kits that include a coupler and also brake-only kits with a 6-bolt lug pattern like those shown on the linked page. These 6-lug kits fit 5200- and 6000-lb axles.
You can choose from several finishes and these vary considerably in cost. A basic raw-finish kit costs less than a Dacromet-finish kit like # K2HR526D, which in turn costs far less than a stainless steel kit like # K2R526S. Please refer to the linked page to see all 6-lug kits.
You can... view full answer...
A great place to start your boat trailer brake conversion project is the linked article that covers the topic of changing a trailer to disc brake operation. The article includes links and details about the whole conversion process.
If you choose to convert your tandem axle aluminum boat trailer from hydraulic drum to hydraulic disc brakes you will also need to replace your actuator since disc brakes require higher pressure to operate. You may be able to replace just the master cylinder... view full answer...
While the 7' Long CE Smith Carpeted Bunk Boards # CE27845 are the longest we carry for shipping, we do offer the carpeting separate that you can use on locally sourced lumber. We have a roll that is 12' long and 11" wide in a variety of colors that will cover the 9' boards you need.
Black CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards # CE11330
Charcoal CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards # CE11372
Blue CE Smith Deluxe Marine-Grade Carpeting for Bunk Boards # CE11350 view full answer...
The two different ratings you see are the WLL (working load limit) and the maximum load strength (break strength).
WLL pertains to the capacity that you want to take into consideration under normal usage. The max break strength however, is the tested amount of force applied (in pounds) before the strap breaks. The WLL is one third of the max break strength. Depending on the manufacturer, some may only list one or the other, or both.
The best way to protect the winch strap from the damaging... view full answer...
The correct EZ Flex equalizer kit you'd need to replace the # TREQ458 that you have is the part # K71-652-00. Both of these equalizers use 9/16 inch diameter bolts too so you'd be covered in that regard as well. view full answer...
We do not offer any kayak carriers intended specifically for mounting on a hard tonneau cover but we do offer foam-block type kayak carriers that could simply rest on top of it and work well for you.
These are intended for transporting kayaks on a vehicle with a bare roof.
The linked page displays all such foam kayak carriers. These offer the advantages of low cost, very light weight and simple installation. They also require no drilling or modification to your hatch-style tonneau cover... view full answer...
Selection of replacement hubs requires you to know the axle weight rating, bolt pattern (there are both 6-on-6 and 6-on-5-1/2 bolt patterns) and the bearing numbers from the current hub.
You need to ensure the new hub has the required weight rating for the axle, the same bolt pattern as your wheels and the same bearings, which ensures the new hub will fit on your spindles. Once you confirm these bits of information you can use the linked page to check for a suitable hub.
To help you I... view full answer...
When the weight of the trailer gets to the point where it is greater than 50% of the weight of the vehicle towing it, we recommend using a weight distribution system. Since you have a camper which has tall sides on it that can act like a sail when buffeted by crosswinds or turbulence from passing traffic, you really should choose a system with an integrated sway control component.
From the information you supplied (thanks for that, by the way), you're dealing with a maximum tongue weight... view full answer...
Go To Results